SmartBlinky™ Electrolyte Monitor
Cost effective battery electrolyte level monitor with quick installation and 8 x brighter LED indication.
Only water batteries when necessary and increase the productivity of your site. Positive indication alerts you to the batteries that need a topping, saving time and increasing productivity by only doing what is necessary.
The Philadelphia Scientific SmartBlinky electrolyte level monitor offers increased functionality at a low price point, helping to protect your battery without unnecessary expense.
- Super bright red and green LED
- Very low power consumption
- Reverse polarity and over-voltage protection.
- Fits all lead acid flooded cells, probe can be cut to required length during installation.
Suitable for flooded lead acid batteries, used in:
- standby power
Ths SmartBlinky, ACC-SWM3-Q, uses the innovative FlexiTap for connecting to the industrial battery. This connection method is quick, simple and safe. Eliminates the need to remove cell bolts during installation and doesn’t require any special tools.
SmartBlinky FlexiTap connection
The light indication of the SmartBlinky follows a simple logic, green light indicates everything is OK, red light means the forklift battery needs topping with water.
System Exposure Temperature: -20° to 160°F (-29° to 71°C)
Operating Voltage: 4 to 12 VDC; 6 VDC Nominal
Forgiveness Zone: 14 to 16 VDC
Permanent Failure: 18 VDC or greater
Nominal Current: 10.8 mA
Weight: 1.05 oz (29.7 g)
Product Number: ACC-SWM3-Q
You may need to drill a hole in the battery cell lid to install the electrolyte monitor probe, the ACC-041 is the recommended tool for this.